C Series Case Erectors | Case SealersCase Erectors

C Series Case Erectors | Case Sealers
C Series Case Erectors | Case Sealers
Request for a quote Call Us Now 1 866 571 7354

The C-Series provide the structural integrity to deliver the performance their designer intended. From the moment a blank enters our case erectors' magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The flaps are folded before the case moves, making it rigid and locking in its “squareness”. A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.

The C-1000 and C-2000 case sealers are more flexible and have the option to seal your cases using hotmelt glue or tape. Using hotmelt glue is a cleaner and more cost effective way of sealing a carton. Adjustments in case size are quick and easy ensuring less down time.

FEATURES

  • Easy to load magazine
  • Eight vacuum powered suction cups holding the blank in the correct position
  • Simple and fast magazine adjustments
  • Stationary flap folding making cases rigid and locked at a 90 degree angle

Case Erector
C-1000

C-1000/2000

PRODUCTION RATE:
Up to 30 cases per minute (depending on the options)

CASE DIMENSIONS:
Length
: 7 7/8″ to 19 5/8″ or 200 mm to 500 mm
Width: 5 7/8″ to 12 3/4″ or 150 mm to 325 mm
Height: (opened case): 5 7/8″ to 20 1/2″ or 150 mm to 520 mm

FOOTPRINT:
Length
: 77” (1955 mm)
Width: 89 3/4” (2280 mm)
Height: 70 7/8” (1800 mm)
--

Case Erector
C-2000

C-1000/2000

PRODUCTION RATE:
Up to 25 cases per minute (depending on the options)

CASE DIMENSIONS:
Length
: 7 7/8″ to 24 1/2″ or 200 mm to 620 mm
Width: 5 7/8″ to 17 3/4″ or 150 mm to 450 mm
Height: (opened case): 5 7/8″ to 25 5/8″ or 150 mm to 650 mm

FOOTPRINT:
Length:
88” (2235 mm)
Width: 97 5/8” (2480 mm)
Height: 70 7/8” (1800 mm)
--

Case Erector
C-300

C-300/400

PRODUCTION RATE:
Up to 10 cases per minute

CASE DIMENSIONS:
Length
: 7 7/8″ to 19 5/8” or 200 mm to 500 mm
Width: 5 7/8″ to 13 3/4” or 150 mm to 350 mm
Height: (opened case): 5 7/8″ to 23 5/8” or 150 mm to 600 mm

FOOTPRINT:
Length: 
84 1/4" (2140 mm)
Width: 87 3/4" (2230 mm)
Height: 63" (1600 mm)
--

Case Erector
C-400

C-300/400

PRODUCTION RATE:
Up to 8 cases per minute

CASE DIMENSIONS:
Length
: 7 7/8″ to 24 3/8” or 200 mm to 620 mm
Width: 5 7/8″ to 17 3/4” or 150 mm to 450 mm
Height: (opened case): 9 7/8” to 25 5/8” or 250 mm to 650 mm

FOOTPRINT:
Length: 
91" (2310 mm)
Width: 93 1/4" (2375 mm)
Height: 63" (1600 mm)