МОДЕРНИЗАЦИЯ И МОДИФИКАЦИИ

Модернизация в понимании Premier Tech Chronos означает применение новых технических решений, позволяющих нашим клиентам достигать поставленных бизнес-целей. Мы внимательно выслушиваем проблемы наших заказчиков для понимания ситуации и нахождения оптимального решения в соответствии с их потребностями. Мы нацелены на обеспечение большей надежности путем сокращения времени простоя, что позволяет повысить производительность.

С годами наши комплексные инициативные научно-исследовательские и конструкторские программы привели к постоянному совершенствованию наших производственных линий; воспользуйтесь неоспоримыми преимуществами, профессиональными навыками и колоссальным опытом проектно-технической группы, отдела по управлению проектами и специалистами по продажам, ведь это поможет вам оптимизировать ваши упаковочные линии. Наши улучшения и модернизации представлены в виде модификаций программного обеспечения, механических частей, электрических компонентов или сочетания перечисленных элементов. Иными словами, мы можем превратить устаревшее оборудование в современное.

 

Модификация FFS

Bag Top Trimmer

With the Bag Top Trimmer located at the top sealer entry, the production run sometimes needed to be stopped to remove...

Bigger Pressure Pulleys

Due to constant strain, the pressure pulleys were prone to wear out and require frequent replacement.

Conveyor Height Adjustment System

Constant demands on the lifting jacks of the conveyor would cause premature damage and need replacing.

Heating Bars Retrofit

New Top Sealer Pulleys

Due to constant wear and tear, the top sealer pulleys needed to be replaced on a regular basis.

Pneumatic Film Roll Support

Constant demands on the lifting jacks of the conveyor would cause premature damage and need replacing.

Pressure Pulley Cleaning Kit

Product could build up inside the V-groove of the pulleys causing the belts to come loose thus stopping production.

Size-Adjustable Filling Chute

Previous Design
Each filling chute changeover could take up to20 minutes of your production time and result in hundreds of wasted bags every day.




Updated Design
The Size-Adjustable Filling Chute can replace up to 3 filling chutes with a single pneumatic one allowing you to make quick changeovers through a simple selector.





Benefits
• Chute size adjustment is automatically carried out in 5 seconds using a remote control
• Integrated 360o dust-collecting ports
• Safer operation since filling chute is controlled by remote control and does not require the operator to climb on top of the machine
• It can accomodate up to 3 bag sizes from 15” to 24” (empty bag width dimensions). For more than 3 sizes, please contact us.



Stainless Steel Bag Opening Laths (SKIS)

Our newly designed laths made of stainless steel and hardened by thermal treatment are the longest lasting laths available on the market...


 

Straight Knurled Wheels Retrofit

Although effective, the seal created by the knurled rollers was not always aesthetically pleasing and could lack strength.

Top Sealer Retrofit

The Top Sealer Retrofit makes the seal height adjustment very easy to do, thanks to...

Valve Bag Fillers Retrofits

4-Bar suction cup bag valve opener

Dual suction cup arrangement with 4-bar linkage provides superior valve opening performance.

Vented Anvil Assembly Retrofit Kit

In the previous design, solid end caps allow product to be trapped in the cartridge sleeve area. This trapped product can cause the anvil to overheat and prematurely wear out.

Pinch Style Seperate Exhaust

The Red Valve can be difficult to install without damaging the internal bladder. When damaged, the bladder is expensive to replace.

2000XT Ultrasonic Retrofit Kit (920 to 2000XT for models US2000, US2001, US2001, & Cleanpak-I)

The Branson 900DA and 921AO power supply and actuator are obsolete – no longer available! If either one fails, both must be...

Pinch Tube Failsafe Mechanism

Springs are added to ensure that the pinch tube stays closed; they effectively block the product pressure during a loss of compressed air...

GWC Keyboard & LCD + Enclosure

Obsolete CRT design is large and creates heat in enclosure. Keypad is also obsolete...

GWC LCD Controller Display

With the updated design, the llat LCD provides crisp, clear, color display of bag weight and other control information...



787/720 "Fluidization" Door Retrofit Kit

Previous fluidization doors did not come equipped with a diffuser door. This can produce uneven fluidization air throughout the Air Pad.



Powered Jackscrew Adjustable Bag Chair

In most operations, the bag chair must be adjusted for different lengths of bags. This chair can be difficult to access and awkward to adjust.

Automated Remote Bulk/Dribble

With the updated design, the operator can adjust the dribble position from a remote keypad...

BOSS - Bag On Spout Sensor

With the new design, two laser sensors detect that the bag is properly positioned for clean and accurate filling...

Pinsonic Ultrasonic Sealer Retrofit

The original 900 Series Actuator and its spare parts have become discontinued as they are no longer manufactured...

Cleanpak Dust Collection Retrofit Kit

With the presivous design, the scale isolation gap at packer post results in weak dust collection flow. 



506/507/508 Electrodrive Conversion

Thanks to the updated design, the motor drive assembly with VFD controller provides smooth, consistent operation at rates up to 12 bags...

510 Electrodrive Conversion Kit

The original design used a Georgia Kobold two speed motor or an Allen Bradley Servo Drive system. Both designs are discontinued.

 

 

 

 

 

 

 

 

 

 

511 servo Drive & Controller Kit

The SEW Eurodrive Movidyn servo controller is obsolete and no longer available.

MP Conversion Kit

The MP weight controller includes an upgrade to solenoid operated air valves...

DM Converter Kit

The DM weight controller provides a digital display of the bag weight.





серия AP

Allen Bradley 1305 and 1336 drives retrofit

Some Allen Bradley 1305 & 1336 drives are now discontinued. Those drives were used by the Premier Tech Chronos’ AP Series...

Bilingual Panel View

The new Panel View (PV-600 +) supports 3 different languages (English, French and Spanish) that can be swapped at any time from...

External Display for Drives

With the previous design, the drive parameters adjustments are made through a touchscreen inside the electrical panel...

External Overload Reset

The palletizer has to be stopped every time a motor overload reset is required, as the reset button is located inside the electrical panel...

Heavy-Duty Pallet Dispenser

This retrofit has been specifically developed to support heavy-duty pallets such as CHEP pallets. Its updated design minimizes fork deflection...

Modular design for elevator conveyor

In the previous design, none of the elevator components (guiding wheels, the elevator frame, or conveyor) are detachable from... 

MOTORIZED FLATTENER HEIGHT ADJUSTMENT

The Motorized Height Adjustment System replaces the manual version for an easy and quick adjustment of the lower conveyor...

Motorized Pacing Conveyor Centering Device

The motorized centering device automatically adjusts the centering guides each time... 

Overhead Turner Retrofit

With chains and springs to open and close the flaps, the previous design is less durable than the updated version.



Reinforcement Kit for Elevator Conveyor

Over time, cracks can appear on the elevator conveyor, which may result in the replacement of the whole module...

Slip or Tie Sheet Dispenser Retrofit

This retrofit enables you to place a cardboard slip sheet on an empty pallet or between... 

Slip Sheet Dispenser Vacuum Pad Retrofit

The new slip sheet dispenser has 2 multi-bellow vacuum pads that lift both ends of the slip sheet higher than...

Software Retrofit

Valve Bag Fillers/Packers Retrofits

GWC-CRT to LCD & Full Keyboard Retrofit Kit (for GWC packers)

Obsolete CRT design is large and creates heat in enclosure. Keypad is also obsolete...

Separate Exhaust Pinch Tube Style Retrofit Kit (for all style AIR packers)

The Red Valve can be difficult to install without damaging the internal bladder. When damaged, the bladder is expensive to replace.

Pinch Tube Fail Safe Mechanism (for All Style AIR and Impeller packers)

With the updated design, springs are added to ensure that the pinch tube stays closed; they effectively block the product pressure...

Fluidization Door w/Diffuser Retrofit Kit (for model 720 & 787 Packers)

Previous fluidization doors did not come equipped with a diffuser door. This can produce uneven fluidization air throughout the Air Pad.

Auto/Powered Adjust Bag Chair (Jack Screw type)

In most operations, the bag chair must be adjusted for different lengths of bags. This chair can be difficult to access and awkward to adjust.

GWC-CRT to LCD for Original Enclosures (for GWC packers)

With the updated design, the llat LCD provides crisp, clear, color display of bag weight and other control information...

BOSS (2 Lasers) Bag On Spout Sensing (for all fully electronic style packers)

With the new design, two laser sensors detect that the bag is properly positioned for clean and accurate filling.

Automated Remote Bulk/Dribble

With the updated design, the operator can adjust the dribble position from a remote keypad...

DM Weight Controller Conversion Kits (for model 714, 718, 770, 787, 800, 801& Fluo packers)

The DM weight controller provides a digital display of the bag weight.

MP Weight Controller Conversion Kits (for model 714, 718, 770, 770E, 787, 800, & 801 packers)

The MP weight controller includes an upgrade to solenoid operated air valves...