CHRONOS RPL-2000 SERIESFully automatic palletizing robot

Có mặt tại

Canada & USA and Latin America

The RPL-2000 Series is ideal for facilities with moderate production rates that want to reduce manual operations, implement advanced equipment, and meet growing production demands.

The design leverages the robot’s agility and versatility to efficiently place pallets, slip sheets and units in the stacking position. This also eliminates the need for additional equipment and maximizes the use of floor space.

When completed, the load exits the cell automatically through a conveyor, significantly reducing the operator’s time spent in the cell.

Speed for cases: from 14 to 80* per minute (840 to 4800* per hour)

Speed for bags: up to 14 per minute (840 per hour)

Applications: bags, bales, bundles, cases, trays, and totes

^{*With multi-unit picks}

Sách quảng cáo

360 Palletizing Robot RPL-2311 360 image

Fully automatic palletizing robot RPL-2322

Fully automatic palletizing robot - CHRONOS RPL-2000 SERIES

Robotic case palletizing machine RPL-2000 - Premier Tech

Features

Reliable

Robotic handling of pallets, sheets, and units
Vast gripper selection to handle any type of unit with high accuracy
Reliable and performant FANUC robot

Efficient

Can be built with 1 infeed with 1 outfeed or 2 infeeds with 2 outfeeds
Palletizing conveyor, pallet positioning device, alignment conveyor, and pick-up conveyor included
Quick installation and commissioning

Safe and easy operations

Built using low-maintenance and easy-to-clean components
Safety fences, interlock doors, light curtains, and approved safety management software included
Multilanguage HMI equipped with an integrated pallet configurator software
Changeovers only take seconds thanks to stored recipes

Options

Finger, clamp, or vacuum end effector
Robot can be selected according to your application needs, such as speed, reach, and payload to optimize your cycle rates and costs
Multiple infeed configurations to meet your desired production rate
Sheet magazines and handling devices for increased autonomy
Stainless-steel components to meet sanitary requirements and facilitate cleaning
Integration with third-party printers, labelers, pallet and product traceability, and more
Integration with pallet wrappers and conveyors

Additional options for bags

Rejection conveyor for non-compliant bags
Automatic bag width adjustment
Weight check system

Specifications

Typical dimensions: 250" L x 164"–254" W x 144" H (6350 x 4166–6452 x 3657 mm)

Full pallet load: up to 72" H (1828 mm) with 40" x 48" layer (1000 x 1200 mm)

Electrical requirements: 460V / 3Ph / 60 Hz (other voltages available)

Models

The RPL-2000 Series comes in three models to meet your needs. They differ mainly in the number of products they can handle simultaneously.

RPL-2111

Up to 14 units per minute (840 per hour)
Picks a single unit from 1 production line
Places it on 1 stacking station on the motorized conveyor

RPL-2111

Up to 14 units per minute (840 per hour)
Picks a single unit from 1 production line
Places it on 1 stacking station on the motorized conveyor

RPL-2311*

From 30 to 80 cases per minute (1800 to 4800 per hour)
Picks multiple units from 1 production line simultaneously
Places them on 1 stacking station on the motorized conveyor
Includes a preparation conveyor where the units are gathered
Achieves higher production rates

^{*For cases only}

RPL-2311*

From 30 to 80 cases per minute (1800 to 4800 per hour)
Picks multiple units from 1 production line simultaneously
Places them on 1 stacking station on the motorized conveyor
Includes a preparation conveyor where the units are gathered
Achieves higher production rates

^{*For cases only}

RPL-2322*

From 30 to 80 cases per minute (1800 to 4800 per hour)
Picks multiple units from 2 production lines simultaneously
Places them on 2 stacking stations on the motorized conveyors
Includes 2 preparation conveyors where the units are gathered
Achieves higher production rates

^{*For cases only}

RPL-2322*

From 30 to 80 cases per minute (1800 to 4800 per hour)
Picks multiple units from 2 production lines simultaneously
Places them on 2 stacking stations on the motorized conveyors
Includes 2 preparation conveyors where the units are gathered
Achieves higher production rates

^{*For cases only}

Nhận báo giá

Hãy cho chúng tôi biết thêm về dự án của bạn và chúng tôi sẽ gửi cho bạn các đề xuất và báo giá miễn phí.

Yêu cầu báo giá

"End-effector design is a very critical aspect in terms of robot integration into a process and you guys are the best of the best in my opinion at doing that."

Gerald Lambert
Executive Vice President of Operations, TW Garner Foods